Second Hand 1800mm 5 Layers Corrugated Cardboard Production Line in Good Conditions

second hand 1800mm 5 layers corrugated cardboard production line in good conditions

second hand 1800mm 5 layers corrugated cardboard production line in good conditions

technical parameter

The working width is 1800mm

The maximum mechanical speed is 180m/min

Temperature requirement is 160200ºC and steam pressure is 1.25mpa.

The steam consumption is 1.01.2 t/h, the air pressure is 0.60.9 MPa, the hot plate length is 10980 mm (600 mm× 18 pieces), and the cold section length is 6000 mm.

Total power 59kw

The power supply requires a voltage of 380V and a frequency of 50Hz

Overall dimensions: 18320mm × 2300mm × 1950mm (length × width × height)
Hot plate part

Overall dimensions of hot plate are 2200mm× long × 600mm× wide × 135 mm high.

The material of hot plate is 20G steel produced by Jigang.

Machining process surface fine grinding treatment

The pressing method adopts dense roller type (the first four blocks are pressing plates)

Shougang, the origin of solid No.45 steel with a diameter of 60mm.

Shougang, the origin of solid No.45 steel with the diameter of 60 mm idler

A driving part, a conveying part

* The diameter of the main driving roller is 800 mm above and 800 mm below

* 20 # steel with a diameter of 320mm before driven roller for large and small belts is produced in Chengdu.

* 20 # steel with 145mm diameter for large and small belt deviation correction rollers is produced in Chengdu.

* The diameter of the front and rear belt rollers is 120 mm. Material No.20 steel is produced in Chengdu

* manual tensioning roller diameter 120mm material No.20 steel origin Chengdu

* The origin of cotton belt is Shenyang Fuli.

* the main motor of the driving department is 55kw

* hydraulic station motor: 4.0kw

design feature

* The overall high-strength wide channel steel mechanism is stable, beautiful and stable to adapt to high-speed work

* Professional manufacturing of hot plates meets the national pressure vessel safety standards. 600 mm steel hot plate stiffeners are welded to keep the hot plate from deformation.

* The heating section adopts dense pressure roller structure cardboard, which is firmly bonded, shaped and flat.

* The inlet and outlet of steam pipe are arranged in S shape, and the temperature of hot plate is uniform.

* hot plate section control temperature to adapt to the speed adjustment.

* The pressure roller in the heating section adopts hydraulic integral lifting, which is stable, safe and reliable.

* The upper cotton belt is equipped with a pneumatic deviation correction device, which is pneumatic in Zhang Liwei. The lower cotton belt is equipped with tension and automatic deviation correction adjustment