Basic Info.
After-sales Service
Engineers Available to Service Machinery Overseas
Product Description
main technical parameters of 7 colour printer machine slotter
main technical parameters of 7 colour printer machine slotter
1) The upper feeding roller is a seamless steel tube, wrapped with wear-resistant rubber, and is balanced.
2) Seamless steel pipe for the lower feeding roller, embossed and plated with hard chrome.
3). The paper feed roller gap dial shows manual adjustment, the adjustment range is 1-12mm, and the cross slide mechanism is adopted to ensure the correct meshing state of the transmission gear during adjustment.
5. Automatic zero reset device
1), the paper feeding department, printing department, slotting department computer automatically reset to zero.
2) Generally, the carton uses an automatic zero reset device, and it can be adjusted to the correct position with a few trial prints, reducing the waste of cardboard.
2. Printing Department
1. Printing roller (plate roller with plate Ø410mm)
1), high-quality steel plate material, surface grinding, hard chrome plating.
2), balance correction, stable operation. lubrication single color printer machine slotter with stable operation
2. Embossing roller
1) The surface of the steel pipe is ground and plated with hard chromium.
2), balance correction, stable operation.
3) The roller dial between the impression roller and the printing roller shows manual adjustment, the adjustment range is 1-12mm, and the cross slide mechanism is adopted, and the transmission gear always guarantees the correct meshing state during adjustment.
3. Anilox roller
1), hard chrome plating, static and dynamic balance treatment, deep hole boring processing, stable high-speed operation.
2) The dots are consistent and the ink is evenly applied.
3) Extend the service life of printing plates and rubber rollers.
4) Pneumatic lifting and lowering of the anilox roller can prevent the ink from drying out in the anilox roller cavity when the printing plate is repeatedly inked and when the machine stops for a short time.
5) Manually adjust the gap between the anilox roller and the printing roller. The adjustment range is 1-8mm. It is connected by a cross slider. The transmission gear always guarantees the correct center-to-center toothing during adjustment.
4. Rubber roller
1) The surface of seamless steel pipe is wrapped with wear-resistant rubber.
2) The rubber roller is specially ground in the middle and high, which can compensate the deformation of the force and improve the ink transfer effect.
3), dynamic balance correction, uniform ink application, not easy to throw ink.
5. Paper feeding upper and lower rollers
1), upper roller: seamless steel tube, delivery paper wheel, quick adjustment type.
2) Lower roll: seamless steel pipe, surface ground, hard chrome plated.
3) Manual adjustment of the paper feed roller gap dial, the adjustment range is 1-12mm, the cross slide design is adopted, and the expansion sleeve is connected. When adjusting, the transmission gear always ensures the correct center distance toothing.
6. Phase adjustment mechanism
1), differential planetary gear mechanism
2) The printing phase is adjusted by a digital input type 360° computer touch screen, and the machine can be adjusted during running and stopping.
3) It has functions such as automatic zero return, automatic return, etc., which makes the registration faster.
3) The horizontal position of the printing roller is manually adjusted with a total adjustment distance of 20mm.
7. Ink circulation
1) Ink is applied by pneumatic diaphragm pump, stable ink supply, simple operation and maintenance.
2) The ink filter screen filters impurities.
3) Automatic ink distribution device, driven by a geared motor, can realize the function of non-stop ink when the machine is stopped, and prevent the ink from drying when the machine is stopped.
4), the ink storage cup to prevent ink splashing and exhaust.
5) Stainless steel ink fountain, automatic cycle cleaning and automatic ink filling.
8. Printing phase fixing device
1) Pneumatic brake mechanism.
2) When the unit is separated or the phase is adjusted, the brake mechanism restricts the rotation of the unit and maintains the fixed point of the original gear position.
3. Slotting part (single shaft and double knife slotting)
1. Crimping wheel
1) Seamless steel pipe, after two grinding processes, the surface is plated with hard chromium, moving smoothly.
2) Manual adjustment of the pressure wheel gap dial, the adjustment range is 2-12mm, the cross slide mechanism is adopted, and the transmission gear always guarantees the correct meshing state during adjustment.
3). Equipped with pre-pressing wheels, the cardboard after the pre-pressing line is not easy to break when pressing the line.
2. Slotting knife adjustment mechanism
1) The knife shaft is a seamless steel tube, after two grinding processes, the surface is plated with hard chromium, and the movement is stable.
2) The slotting width is 7mm.
3) The box height adjustment adopts four-knife synchronous electric adjustment and button control.
4) Manual adjustment of the gap dial of the slotting tool holder, the adjustment range is 3-12mm, the cross slide mechanism is adopted, and the transmission gear always guarantees the correct meshing state during adjustment.
3. Slotting phase adjustment mechanism
1) Planetary gear mechanism.
2) The slotting phase is adjusted by a digital input 360° computer touch screen, and the machine can be adjusted during operation and stop.
Pre-pressing wheel: The upper and lower are super-wide large-arc counter-rolling, and the lower wheel is a circular-arc wheel, which effectively destroys the corrugation inside the cardboard.
Forming crimping wheel: The upper wheel is designed with a rubber wheel, and the lower wheel is a single-line design with imitation die-cutting. The crimping line is not easy to break, and the folding line is straight and easy to fold. The pressing effect is greatly improved, laying a good foundation for the subsequent processing of the carton. Effectively improve the working efficiency of the automatic box gluer or automatic nail box machine.
Four, lubrication single colour printer machine slotter with stable operation
1) Each unit uses an oil pump for lubrication to realize circulating spray lubrication.
2) Each oil tank is equipped with an oil storage balancer, which can make the oil level of each group uniform at the same height.
Five, main technical parameters
1. Machine design speed: 120 (sheets/minute)
2. Maximum production speed: 100 (sheets/minute)
2. Maximum paper feed size: 1250mm×2550mm
3. The minimum paper feed size: 320mm (full page) × 650mm
4. Maximum printing area: 1200mm×2500mm
5. Overprint accuracy: ≤±0.5mm
6. Slotting accuracy: ≤±1.5mm single colour printer machine slotter with uniform ink application
7. Standard printing plate thickness: 7.2mm.
8. Separate sheet feeding: 1650×2550mm.
Address:
104rode, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Light Industry & Daily Use
Management System Certification:
ISO 9001
Company Introduction:
Factory of carrugtae cardboard working machine, working line
Cangzhou AoDong Packaging Machinery Manufacturing Co., Ltd was built in 1999 and high quality enterprise, authorized by Hebei Province Quality and Technical Supervision Bureau, ISO9001 international quality management system certificate and European CE certificate. Our company also hold People′s Republic of China Customs Import and Export Right and Packaging Union Vice Chairman Units Honor. Our company specializes in manufacturing 3-ply, 5-ply, 7-ply corrugated paperboard production line and carton equipment R& D, manufacturing, and oversea′s sales. It covers an area of nearly 20, 000 square meters, has a first-class R& D team, technical engineers, excellent management talents and domestic and foreign marketing team.
